Thank you for purchasing the Nebula300+ Plus model: ARN02304U6 from Nexxt Solutions.
Your new router is compatible with any Operating System, it only requires a browser to access the configuration website. (IE, Firefox, Opera, Chrome, Safari, etc).
Recommendation: Do not connect the Nebula300 Plus via cable to your main modem/router via cable.
Requirements
PC or Laptop
Nebula300 Plus (this will come in the box)
Power Adapter (this will come in the box)
Ethernet Cable (this will come in the box)
Set the Nebula300 Plus
1. Take the Nebula300 Plus from the box and place it next to the main modem/router
2. Take the power adapter that comes in the box of the Nebula300 Plus, connect the end that goes to the Nebula300 Plus and the other end in your wall outlet
This is all for now
How to connect my PC or Laptop
There is 2 ways to connect your computer to the Nebula300 Plus to do the setup. Via Wireless and Via Ethernet
Note: Choose one of the 2 ways to do the setup. Then go to the next steps "How to configure the Nebula300 Plus as Repeater"
Connect the computer via Wi-Fi
On your laptop, click the network icon in the notification area (at the lower-right corner of your screen)
Click on the Wireless Network you want to connect
If you want to connect to this Wireless Network later o in another time, check the box "Connect Automatically". Then click Connect
Enter the password/security key if this is required by the network. Note: The Nebula300 Plus should not ask for password
Check your network icon in the notification area to see if you’re connected to the network. If it’s showing the network signal strength (as the screenshot below), then you’ve successfully connected your laptop to WiFi.
Connect the computer via Ethernet
For this part, we recommend to turn OFF the Wi-Fi of the computer
1. Take the Ethernet cable in your hands
2. Connect one end of the Ethernet cable to the Ethernet port on your computer
3. Connect the other end of the Ethernet cable to the LAN port on the Nebula300 Plus.
Note: Take notice we are not connecting the main modem/router to the Nebula300 Plus.
Below an image on how should the physical connections
How to configure the Nebula300 Plus as Repeater
NOTE: Please follow the steps as indicate below
Once you have choose how to connect your computer with the steps explain above, is now time to configure the Nebula300 Plus as a Repeater
Step# 1
Open your browser, on the address bar type the following: 192.168.0.1 then hit ENTER
Step# 2
You will see the following webiste
Here you need to type the default password: admin
Then press the Login button to go forward
Step# 3
Once inside you will see the first part of the settings. Here you need to set the Connection Type and Wireless Settings
On the Connection Type options, please proceed to select Dynamic IP
On the WiFi Name option, you can change the default name Nexxt_XXXXXX to any name you want or leave it like by default (which we recommend)
On the WiFi Password option, you have to add a password. This password can be anything you want, but we since we are using the Nebula300 Plus as a repeater we suggest to use the same password as the main Wi-Fi. So you do not need to have severals password with you.
Press OK when you are ready
Step# 4
Once inside you will see a list of option to the left side of the screen
Select the option Wireless Settings
Step# 5
Select the option Universal Repeater
Step# 6
After selecting the Universal Repeater, you will see he is scanning the area for wireless signal close to him. You should be able to see yours. When you see it, select the wireless signal you want the Nebula300+ repeat and then add the password of that wireless signal in the Wi-Fi Password.
NOTE: Please make sure you are selecting the correct Wi-Fi signal and typing correctly the password.
Step# 7
Press OK or Apply you will see a little pop-pop window that will tell you "When enabling the Universal Repeater Mode the only way to access the Nebula300+ again is via the website nexxtwifi.com" and that will allow you to access to the website again.
Wait until installation complete and you will have your Nebula300+ repeating the internet.